A fine, clean, accurate
depth of cut is achieved by software
controlled adjustment of both
the cutting speed and the power
output of the laser cut. The control
of cutting is so accurate, you
can even etch onto paper.
A cross-flow extraction system draws
away the fumes by sending a flow of
air across the bed during cutting. To
achieve a clean cut edge, an irrigation
system is attached to the cutting head
which sends a stream of air or inert
gas to the point of cut.
The FB Laser Cutting Systems use sealed
CO2 water cooled lasers and are certified
Class 1 laser products, being interlocked
and fully enclosed while cutting.
Clean, accurate
cutting can be achieved on a wide range
of materials including:
Acrylic, acetate
and several other plastics
Paper, card and
wood
Leather and suede
Fabrics from
silk to denim
Signmaking materials
including self-adhesive films, reflective
and retro-reflective materials
As pioneers of the laser
cutting industry we bring you our latest range of
machines, designed to be an efficient and productive
asset to your business. We have combined many years
of experience with state of the art technology,
to give you the ultimate laser cutting solution.
Many industries are now finding that laser technology
is far superior to other cutting methods and our
laser machines have proved to be successful in
all types of markets from automotive to textiles.
Our systems demonstrate the precision to cut a
wide variety of materials at speeds suitable for
mass production.
.gif){kind=spacer}
.gif){kind=spacer}
