Roll Feed Axis Not Working

Check the following:-

• Do you have the correct cutter driver loaded in your cutter set-up?
  For example: FB725 (Roll / Sheet)
  
• Is the Sheet and Roll button on in the cutter set-up?(black dot is on)
  
• With the cutter powered off, can you turn the silicon drive rollers easily?
  
• Is the material free to move through the rollers?
  
• Is the pinch / pressure roller rotating easily?
  
• Is their sufficient spring pressure on the pressure roller ?
  
• If the cutter beeps when attempting to drive the rollers and there is a problem,the following will appear in the LCD display: “Y2 axis error”
  
• The beep may indicate there is a problem with the drive motor / encoder but check the above points first before condemning the motor / encoder.
  

CadCam Technology Ltd
5 Crocus Street
Nottingham
NG2 3DE
UK

+44 (0) 115 844 8050